Geovision GV-CS1320 2MP H.264 Camera Access Controller with a built-in Reader
Geovision GV-CS1320 2MP H.264 Camera Access Controller with a built-in Reader
- 2MP progressive scan super low lux CMOS
- Minimum illumination at 0.02 lux
- Dual streams from H.264 and MJPEG
- Up to 15 fps at 1920 x 1080
- Day and night function (with removable IR-cut filter)
- Built-in IR with effective distance up to 3 m (10 ft)
- Ingress protection (IP66)
- DC 12V, 2.5A / PoE+ (IEEE 802.3at)
- Built-in microphone and speaker
- Wide Dynamic Range (WDR)
- Built-in micro SD card slot
- Provides 180° panorama view
- ONVIF (Profile S) conformant
- Built-in 13.56 MHz, ISO 14443A reader
- GeoVision access cards with GID (GeoVision Identifier) support
- 2 types of interfaces, RS-485 and TCP/IP, supporting 2 readers for each interface
- OSDP communication through RS-485
- 1 door (one-way or two-way control)
- 2 inputs, dry contact (Door Sensor / Exit Button)
- 1 relay output (Electric Lock)
- Support for GV-I/O Box 4 Ports for door / fire / temper sensor, door button and doorbell applications
- Touchpad to activate two-way communication between the operator and visitors
- Snapshots captured upon card presented and touchpad activated
- SIP / VoIP calling support
- Anti-Passback (APB) support
- GV-Access app for push notifications
Description
GV-CS1320 is an access controller with a 2 MP camera and 13.56 MHz reader built in. GV-CS1320 recognizes access control cards and accordingly grants access to up to 100,000 users. Its camera captures a live view of the entrance and transmits it to the access control system GV-ASManager over a network, eliminating the need to install and maintain a separate camera.
For the operator to communicate with visitors at the door installed with GV-CS1320 and grant access, three types of notifications are available: SIP/VoIP Calling, GV-ASNotify PC program, and GV-Access mobile app.
When the touchpad on the GV-CS1320 is activated, it will make a VoIP call to the operator, allowing the operator to communicate with the visitor and enter an access code to unlock the door.