The Elara™ FC-Series O thermal security camera is one of FLIR’s premium thermal security cameras for perimeter protection. The Elara FC-Series O integrates with external video analytics devices, such as FLIR’s TRK or third party solutions, to classify human or vehicular intrusions. The Elara FC-Series O also offers a wide range of high-performance lenses, with a choice of resolutions, offering greater flexibility for tailoring security systems to specific site conditions.
General
- Detector Type
- Long-Life, Uncooled VOx Microbolometer
- Dimensions (L x W x H)
- Without sunshield: 259 x 114 x 106 mm/10.2" x 4.5" x 4.2" With sunshield: 282 x 129 x 115 mm/11.1" x 5.1" x 4.5"
- Effective Resolution
- 307200
- E-Zoom
- 4x continuous E-Zoom
- Focus Range
- Athermalized, Focus-Free
- Power Consumption
- Source POE (802.3af) POE+ (802.3at) 12VDC 24VDC 24VAC(VA) Heater off <5.5W <5.5W <5.5W <5.5W <8W Heater on (@ 100%) N/A <25W <25W <25W <32W
- Surge Immunity on AC Power Lines
- EN 55024: 2010 and 55022: 2010 to 4.0kV on AC aux power lines; EN 50130-4:2011; IEC 62599-2:2010
- Surge Immunity on Signal Lines
- EN 55024: 2010 and 55022: 2010 to 4.0kV
- Warranty
- Camera: 3 Years Sensor: 10 Years
- Weight
- 2.5kg (5.5 lbs.)
Compliance & Certifications
-
Approvals
-
CE: EN55032; FCC 47 CFR Part 15, Subpart B, Class A (within CISPR 22:2008 Class A limits)
-
Certifications
-
IEC 60068-2-1:2007; IEC 60068-2-2:2007; ISTA-1A; IEEE 802.1x
-
Compliance
-
RoHS Directive 2011/65/EU; WEEE 2012/19/EU
Environmental
-
Humidity
-
0-95% relative humidity
-
IP Rating (dust & water ingress)
-
IP66 & IP67
-
Operating Temperature Range
-
-50°C to 70°C/-58°F to 158°F (Continuous Operation) -40°C to 70°C /-40°F to 158°F (Cold Start)
-
Shock
-
MIL-STD-810G "Transportation"
-
Storage Temperature Range
-
-50°C to 85°C/-58°F to 185°F
-
Vandal Resistance
-
IK10 (except Windows)
-
Vibration
-
IEC 60068-2-27
System Integration
-
Analog Video Output Composite
-
1Vp-p (PAL or NTSC), 1 x BNC 75Ω
-
Control Input/Output
-
1x Dry Contact in; 1x Relay Out (rated load 0.025A@ 5VDC)
-
Ethernet
-
10/100 Mbps
-
External Analytics Compatible
-
Yes
-
Network APIs
-
FLIR SDK FLIR CGI ONVIF Profile S
-
Streaming Resolution
-
D1: 720 × 576 4CIF: 704 × 576 Native: 640 × 512 Q-Native: 320 × 256 CIF: 352 × 288 QCIF: 176 × 144
-
Supported Protocols
-
IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTCP, TCP, UDP, ICMP, IGMP, DHCP, ARP, SCP, FTP, RTP/RTSP, Unicast/Multicast, TCP/IP, HTTP, IEEE 802.1X
-
Video Over Ethernet
-
Two independent channels of H.264 (Restricted VBR and CBR,10kbps-4Mbps, MPEG4, and MJPEG)
Thermal Camera
-
Image Uniformity Optimization
-
Automatic Flat Field Correction (FFC); Thermal and Temporal Triggers
-
Lens
-
75mm
-
Pixel Pitch
-
17 µm
-
Thermal AGC Modes
-
Auto AGC, Manual AGC, Plateau Equalization AGC, Linear AGC, Auto Dynamic Detail Enhancement (DDE), Max Gain Setting
-
Thermal AGC Region of Interest [ROI]
-
Default, Presets and User definable to insure optimal image quality on subjects of interest
-
Thermal Frame Rate
-
NTSC: 30 Hz - PAL: 25 Hz / 8.3 Hz
Video & Recording
-
Composite Video NTSC or PAL
-
Hybrid system with IP & analog video
-
Local Storage
-
Support for 32GB SD Card (not supplied)
Visible Camera
-
Array format
-
640 × 480
-
Field of view (FOV)
-
8.6° × 6.6°
-
f-number
-
f/1.1
-
Focal Length
-
75 mm
-
Sensitivity
-
<35mK for F# 1.0 optics
-
Spectral Range
-
7.5 µm to 13.5 µm
Downloads
