Mobotix MX-2WirePlus-Set-PW Mx2wire+ turns an existing two-wire cable

Mobotix

Sort By:

Mx2wire+ turns an existing two-wire cable into a modern multimedia cable

Key Features:

  • Ethernet and PoE data transfer using a two-wire cable
  • Simple connection of 10/100 Mbps Ethernet end devices (e.g., IP camera, IP telephone)
  • Power supply for Mx2wire+ and end device via PoE/PoE+ or 48–57 V DC, 600 mA
  • Connected end devices are supplied with up to 13 watts via PoE (PoE class 3)
  • Maximum data transfer range of 500 m and data rate of up to 50 Mbps (depending on distance)
  • No need for expensive and time-consuming installation of network cables
  • Perfect for wireless communication is not possible (due to distance to sender, thickness of walls, etc.)
  • Network extension, including PoE, by connecting a Cat7 cable of up to 500 m in length as a two-wire cable
  • Simple installation in standard sockets (surface- or flush-mounted)
  • Two LEDs display current connection and supply statuses
  • Developed, produced and patented by MOBOTIX Germany
  • Ambient temperature: -30 to 50°C / -22 to 122°F
  • Complete set consisting of two Mx2wire+ units, on-walls sockets and mounting parts

    Weatherproof GPS time base for MOBOTIX systems • GPS and Glonass support • Includes outdoor temperature and illumination sensors • Connects via MxBus 2-wire cable • Protection class IP66/IK08, -30 to 60°C / -22 to +140°F • Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x and D2x

      Expansion module for Indoor Cameras c26, i26, p26 and v26 (installed on the back)

      Key Features:

      • Not suitable for x25 indoor cameras
      • For connecting external sensors (e.g., door and window contacts) and switches of external devices (e.g., relays with lamps and motors)
      • Two inputs (galvanically separated): 0 V to 48 V AC/DC
      • Two outputs: 2x floating (load per contact max. 30 W or 1 A or 48 V AC/DC) or 2x 12 V DC (max. 50 mA per output)
      • 2x MxBus terminal connector (MxBus will be supported only by later available hardware versions of the x26 cameras)
      • Ambient temperature: 0 C to 40 C (32 F to 104 F)
      • Power consumption: 1 W

        Infrared illuminator with 120° illumination angle (horizontal and vertical), aluminum housing

        Key Features:

        • 860 nm
        • IP67
        • Range: up to 20 m (66 ft.)
        • PoE+ power supply via network cable (IEEE 802.3at), 19 W (max.) power consumption
        • Photosensor for automatic switching on/off (threshold value: 3 lux, delay for switching off: 150 s)
        • Including standard mount for installing on wall and ceiling, screws, preassembled 0.9 m patch cable with RJ45 connector and MOBOTIX special sealing ring
        • Optional accessories: mounting brackets for M1x/M2x (Mx-M-IRA-ML/Mx-M-IRA-M)
        • Housing color: white

          Infrared illuminator with 15° illumination angle (horizontal and vertical), aluminum housing

          Key Features:

          • 860 nm
          • IP67
          • Range: up to 160 m (525 ft.)
          • PoE+ power supply via network cable (IEEE 802.3at), 19 W (max.) power consumption
          • Photosensor for automatic switching on/off (threshold value: 3 lux, delay for switching off: 150 s)
          • Including standard mount for installing on wall and ceiling, screws, preassembled 0.9 m patch cable with RJ45 connector and MOBOTIX special sealing ring
          • Optional accessories: mounting brackets for M1x/M2x (Mx-M-IRA-ML/Mx-M-IRA-M)
          • Housing color: white

            Infrared illuminator with 30° illumination angle (horizontal and vertical), aluminum housing

            Key Features:

            • 860 nm
            • IP67
            • Range: up to 120 m (394 ft.)
            • PoE+ power supply via network cable (IEEE 802.3at), 19 W (max.) power consumption
            • Photosensor for automatic switching on/off (threshold value: 3 lux, delay for switching off: 150 s)
            • Including standard mount for installing on wall and ceiling, screws, preassembled 0.9 m patch cable with RJ45 connector and MOBOTIX special sealing ring
            • Optional accessories: mounting brackets for M1x/M2x (Mx-M-IRA-ML/Mx-M-IRA-M)
            • Housing color: white

              Infrared illuminator with 45° illumination angle (horizontal and vertical), aluminum housing

              Key Features:

              • 860 nm
              • IP67
              • Range: up to 80 m (262 ft.)
              • PoE+ power supply via network cable (IEEE 802.3at), 19 W (max.) power consumption
              • Photosensor for automatic switching on/off (threshold value: 3 lux, delay for switching off: 150 s)
              • Including standard mount for installing on wall and ceiling, screws, preassembled 0.9 m patch cable with RJ45 connector and MOBOTIX special sealing ring
              • Optional accessories: mounting brackets for M1x/M2x (Mx-M-IRA-ML/Mx-M-IRA-M)
              • Housing color: white

                Infrared illuminator with 60° illumination angle (horizontal and vertical), aluminum housing

                Key Features:

                • 860 nm
                • IP67
                • Range: up to 50 m (165 ft.)
                • PoE+ power supply via network cable (IEEE 802.3at), 19 W (max.) power consumption
                • Photosensor for automatic switching on/off (threshold value: 3 lux, delay for switching off: 150 s)
                • Including standard mount for installing on wall and ceiling, screws, preassembled 0.9 m patch cable with RJ45 connector and MOBOTIX special sealing ring
                • Optional accessories: mounting brackets for M1x/M2x (Mx-M-IRA-ML/Mx-M-IRA-M)
                • Housing color: white

                  Infrared illuminator with 90° illumination angle (horizontal and vertical), aluminum housing

                  Key Features:

                  • 860 nm
                  • IP67
                  • Range: up to 35 m (115 ft.)
                  • PoE+ power supply via network cable (IEEE 802.3at), 19 W (max.) power consumption
                  • Photosensor for automatic switching on/off (threshold value: 3 lux, delay for switching off: 150 s)
                  • Including standard mount for installing on wall and ceiling, screws, preassembled 0.9 m patch cable with RJ45 connector and MOBOTIX special sealing ring
                  • Optional accessories: mounting brackets for M1x/M2x (Mx-M-IRA-ML/Mx-M-IRA-M)
                  • Housing color: white
                    Audio cable to connect a MOBOTIX 7 audio module to the AudioIO of the S74, 5m
                    $59.00

                      Sensor cable straight-straight, lenght 1 m/3,3 ft • For connecting optical sensor modules and thermal sensor modules to the S7x camera body

                        Sensor cable straight-angled, lenght 1 m/3,3 ft • For connecting optical sensor modules and thermal sensor modules to the S7x camera body • recommended for PTMounts

                          Sensor cable straight-straight, lenght 2 m/6,6 ft • For connecting optical sensor modules and thermal sensor modules to the S7x camera body

                            Sensor cable straight-angled, lenght 2 m/6,6 ft • For connecting optical sensor modules and thermal sensor modules to the S7x camera body • recommended for PTMounts

                              Sensor cable straight-straight, lenght 3 m/9,9 ft • For connecting optical sensor modules and thermal sensor modules to the S7x camera body

                                Sensor cable straight-angled, lenght 3 m/9,9 ft • For connecting optical sensor modules and thermal sensor modules to the S7x camera body • recommended for PTMounts

                                  MOBOTIX 30m optical fibre cable for Long Cable Extender Variante A
                                  $114.00

                                    Tinted replacement dome suitable for MOBOTIX MOVE SpeedDome SD-330

                                    For particularly bright environments

                                      Standard replacement dome suitable for MOBOTIX MOVE SpeedDome SD-330

                                        Weatherproof installation box with integrated 4-kV surge protection (Type 2 P4) for connecting two IP cameras/PoE devices using one Ethernet cable

                                        Key Features:

                                        • Interfaces (weatherproof): 1 LSA (with shield clip) for Ethernet 2 100Base-T, 2 MxRJ45 for Ethernet 100Base-T with PoE Mode A, 1 protective earth terminal
                                        • IP66 and IK08, ambient temperature: -30 C to 60 C (-22 F to 140 F)
                                        • Accessories (available separately): MxSplitProtectHR Hat Rail module (Mx-A-SPA-HR), cover with camera mount in three versions (Mx-A-SPCA-M/-H/-V), pole mount (MX-MH-SecureFlex-ESWS)
                                        • Housing color: white